Cleaning, Stripping & Patching
Wall Repair
The Wall Repair Patch is a self-adhesive aluminum patch designed to repair holes up to seven inches in diameter. The mesh patch design allows for more airflow to quicken dry time and make fast work of patching holes. The patch can be repositioned and cuts easily with scissors. To use, clean the area, cut the patch, place it over the hole, spackle over the patch, let dry and sand. The patch is available in three sizes: 4-inch x 4-inch, 6-inch x 6-inch and 8-inch x 8-inch.
Adhesive Caulk
Phenoseal Vinyl Adhesive Caulk is a caulk, sealant and adhesive in one product. The unique vinyl formula works indoors and out. The product is designed to gun easily, dry quickly and clean up with soap and water. Once cured, the caulk is mildew resistant, waterproof and can be painted after two hours with either latex or oil-based paints. The low odor product comes in eight colors in 10-oz. cartridges, with custom color matching available, and has a lifetime guarantee.
Professional Sponge Kits
The 3X Sponge Kits are now available to the professional painting market. The large 
sponge kit contains a variety of different shaped, 9-inch long sponges to fit any application. The large area sponge is recommended for sanding drywall seams or other flat painted surfaces. The large dual angle sponge is designed for sanding in tight crevices or other hard-to-reach areas. Large corner sponges sand both sides of an inside drywall corner. The 3X small sponge kit contains a small area sponge, a small dual angle sponge and a small corner sanding sponge. Replacement sponges are available for both kits.
Drywall Repair
Rapid Set OnePass is formulated with Rapid Set non-shrink cement to allow full-depth application in a single pass. The low-alkali material is used for general construction and repair of wallboard, cement board, wood, plaster and other surfaces and can also be used as a texturing material. The compound is weather resistant and durable in exterior and interior applications, setting in 20 minutes and ready for paint in about 90 minutes. In mold resistance tests using ASTM method D3273, the product received the highest ASTM rating of 10, representing no mold growth at the end of the test.
CTS Cement Manufacturing Corp.
Paint Remover
The Silent Paint Remover is a paint remover designed to remove up to 20 coats of 
paint and varnish in 30 seconds without releasing lead into the air. The tool heats the wood with infrared heat to approximately 300 F under the surface, breaking the bond between wood and paint. A sharp scraper is then used to scrape off any quantity of coating down to the wood surface. No chemical, sanders or grinders are needed. The remover works on lead, acrylic, alkyd and oil paints, as well as varnish and has a 1-year full warranty from the factory.
Stripper & Remover Line
NEWPARKS offers an expanded line of strippers and removers for professionals: Power 
Stripper's semi-paste formula is fast acting, non-flammable and removes up to four layers of material in one application. Spray On Stripper is a fast acting, easily applied, sprayable semi-paste designed for hard-to-reach areas where brush application is not practical. Detail Stripper penetrates small cracks and intricate details to remove finishes and wipes off with steel wool. Over Time Stripper is a clear, semi-paste containing no methylene chloride or flammable solvents designed to remove multiple layers without harming the wood. Additional products are available.
Caulk Coloring System
The Create-A-Color Caulk Coloring System consists of Create-A-Color Caulk and Create-A-Color Caulk Mixers, available in a metal, professional model and a plastic standard model. The coloring system allows users to match caulk to the colors of painted walls, wallpaper, fixtures, countertops, tile and exterior surfaces. The caulk mixes by hand in two minutes using a Create-A-Color Caulk Mixer. The system is designed for use with Create-A-Color Caulk as the base and ordinary latex paint. The clamshell caulk mixer packaging includes a syringe for extracting the paint and a complete step-by-step instruction guide.
Molding Scraper
The new Contour Moulding Scraper offers an ergonomic cushioned handle and a quick and easy blade changer. The scraper is designed to remove paint and varnish from base and ceiling moulding; chair rail and wall trim; and door and window trim. Included in the kit are six heavy-duty interchangeable stainless steel blades with 12 different scraping profiles. The blades can be re-sharpened and used dry or with chemicals. The product also removes putty, caulk and rust from a variety of surfaces.
Pre-Paint Cleaner
No rinse Krud Kutter Prepaint Cleaner TSP substitute is designed to clean and etch prior to painting for easy adhering of new paint. The ready-to-use spray on/wipe off formula removes dirt, grease, smoke, mildew stains, food stains, heel marks and more from painted or unpainted wood, metal or vinyl wallpaper and is safe to use on paints, varnish, lacquer and polyurethane. The water-based, biodegradable product can be painted over after 10 minutes and has no unpleasant odor.
Supreme Chemical of Georgia Inc.
Paint Remover
Original Krud Kutter is designed to remove not only dried latex paint from carpet, floors and clothes but also safely and
easily remove wallpaper adhesive, tape residue, grease and oil, and most stains. The remover is biodegradable, water-based, non-toxic and leaves no residue. The product can be purchased in a variety of sizes, including 5-gallon pails and 55-gallon drums.
Supreme Chemical of Georgia Inc.
Cleaning Bucket
The Dump Bucket is designed for the safe, easy and efficient disposal of latex wash water. The cleaning bucket is placed directly into the sewer clean-out pipe found around the perimeter of most buildings. The Bucket supports itself on the pipe and is ready for use. Cleaning brushes, rollers and draining your spray line is accomplished without the worry of upsetting a customer or facing large fines due to storm drain runoff.
Carlson Painting
Soda-Based Abrasives
ARMEX Blast Media is a line of baking soda abrasives designed for use in fire restoration and mold remediation. The cleaning system can also be used for maintenance of processing equipment, removing grease, oil, stains, residues, paint and surface corrosion. The products are USDA-approved for use in food processing facilities as an A1 cleaner. Because of baking soda's relative softness and friability, stone and other masonry materials on exterior structures can be effectively cleaned with baking soda-based abrasives.
Wood Cleaner
Rock Miracle's UltraClean Composite Wood Cleaner is designed to remove food stains, dirt and mildew stains from composite wood decking. The bleach-free and biodegradable cleaner is available in 1-gallon and 5-gallon sizes. The cleaner is highly concentrated and designed to be mixed with four gallons of water for every one gallon of concentrate.